Avatar

Colin Lamb

  • Total activity 26
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 2 users
  • Votes 0
  • Subscriptions 16

Activity overview

Latest activity by Colin Lamb
  • Avatar

    Colin Lamb created an article,

    Understanding CAN error codes

    In NAVdisplay, one of the measurements available in the NCOM output from an RT is "CAN last error code".  When displayed in NAVsuite 2.7 (the version current at the time of writing) and earlier ver...

  • Avatar

    Colin Lamb created an article,

    RT-XLAN compatibility with AC version

    If older RT-XLANs (pre October 2018) are to be used with RT-XLAN (AC version), specific firmware and configuration requirements must be met for compatibility.  RT-XLAN (AC version) is identified by...

  • Avatar

    Colin Lamb created an article,

    RT-XLAN (AC version) overview

    In October 2018, a new version of the RT-XLAN was released that can be configured to use 2.4 GHz or 5 GHz WiFi bands.  Previously, the RT-XLAN could only support one of these bands.  In both the ol...

  • Avatar

    Colin Lamb created an article,

    Connecting to an OxTS INS using Ethernet

    Introduction Ethernet communications between an OxTS INS and a PC use two protocols, UDP and FTP.  UDP is used to carry the live navigation output from the INS in the form of the NCOM data stream a...

  • Avatar

    Colin Lamb created an article,

    Fix for NAVdisplay bug in NAVsuite 2.0

    A few of our European users of NAVdisplay have reported a bug in NAVdisplay version 180124.14cu, which causes the application not to open correctly, so the window is not visible, but it is listed a...

  • Avatar

    Colin Lamb created an article,

    RT1003 Locata integration

    Introduction Locata produce a system that is a “local ground-based replica” of GPS-style positioning.  The system utilises a network of small, ground-based transmitters (LocataNet) covering a chose...

  • Avatar

    Colin Lamb created an article,

    NAVgraph templates

    The following additional templates are currently available for NAVgraph.  Please download and copy to your C:\ProgramData\OxTS\NAVgraph\Layout folder.   Acceleration XYZ - accelerations in the vehi...

  • Avatar

    Colin Lamb created an article,

    Custom geoid files

    These grid files can be applied in NAVconfig (called through 'Review configuration' button) to perform vertical coordinate shifts during post-processing. In order to use these templates the *.ugf...

  • Avatar

    Colin Lamb created an article,

    NAVsuite Software Installation Guide

    This document provides instructions on how to install the NAVsuite software from OxTS. It is valid for NAVsuite versions 170829 and later, though the prerequisites may differ with the version. The ...

  • Avatar

    Colin Lamb created an article,

    Conversion of a RINEX file containing L5 data for use by NAVsolve

    The RINEX parser used by NAVsolve is not able to handle L5 data, so these must be removed from the RINEX file before it can be used in post-processing.  To do this, please download and install RTKL...