Jacob Amacker
- Total activity 47
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 7
- Subscriptions 30
Activity overview
Latest activity by Jacob Amacker-
Jacob Amacker created an article,
Drone installation guide
Installing an INS on a drone comes with a myriad of hurdles. This guide will list several pointers for improving drone setups to get the best data. The list is by no means exhaustive. Anten...
-
Jacob Amacker created an article,
xNAV650 cables
The xNAV 650 currently has two available user cable options, shown in this article. These are: 14C0222A xNAV650 user cable PN109-01060: Bare ends 14C0228 xNAV650 Mobile Mapping cable PN109-01095: ...
-
Jacob Amacker created an article,
Using a Reach Emlid RS2 Base Station
This is an article on using a base station with the xNAV650 or Survey+ INS device. This article will focus on the Reach Emlid RS2 which offers an economical solution (about $2000) to achieving RTK ...
-
Jacob Amacker created an article,
Using a Luxact wheelspeed sensor with the Survey+
This article will include some information on using a wheelspeed sensor with the Survey+. A wheelspeed sensor is a perfect partner to an INS in GNSS-challenged environments for getting precise and ...
-
Jacob Amacker created an article,
Global coordinates with Georeferencer
OxTS Georeferencer outputs pointclouds in an LAZ/LAS format in local coordinates. For many applications, global coordinates are needed. This article will discuss the use of global coordinates with ...
-
Jacob Amacker created an article,
NAVconfig User Guide
This is a support guide for using NAVconfig. This software is a part of NAVsuite and will allow you to configure your INS with data outputs and inputs and physical setup. NAVconfig deals with the ...
-
Jacob Amacker created an article,
Hardware Integration with Velodyne LiDAR
This article will take you through integrating your xNAV550 INS device with Velodyne LiDAR devices on the hardware level. There are two main ways of integrating your devices: Firstly, OxTS now pr...
-
Jacob Amacker created an article,
OxTS Georeferencer Full Guide
This is a full guide for using OxTS Georeferencer to produce pointclouds of your surveys from recording your data to viewing your pointcloud. Georeferencer versions: Georeferencer 1.0 January ...
-
Jacob Amacker created an article,
Completing a Survey
This is a guide to completing a survey with an OxTS INS device. It will help you with setting up and using your device, completing your survey and processing your data. Links to other support guide...
-
Jacob Amacker created an article,
Performing a Boresight Calibration
This Support Guide article will guide users through performing a boresight calibration to improve the angular and linear accuracy of Pointclouds. This process is carried out using OxTS Georeference...