Sam Souliman
- Total activity 29
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 18
Articles
Recent activity by Sam Souliman Sort by recent activity-
Recovery from Firmware Upgrade Failure
1. IntroductionThis document is intended to provide first line help in the recovery from a firmware upgrade failure or other issue which has resulted in the IP address reverting to the fallback IP ...
Applying GNSS Auth codes
Process to apply GNSS Auth codes to OxTS units with NovAtel receiver Applying a GNSS Auth code to an RT or Survey+ 1. Ensure that the computer is correctly configured to communicate with the unit....
OxTS Reference Frames and ISO8855 Reference Frames
Reference Frames OxTS navigation frame ISO 8855 earth-fixed system OxTS horizontal frame ISO 8855 intermediate system OxTS vehicle frame ISO 8855 vehicle system Angles Heading and Yaw Pitch Roll...
Differential corrections on OxTS units- RINEX files in post processing
RINEX files Receiver INdependent EXchange format files contain raw satellite navigation system data relative to a specified interval of time (typically one calendar day). They allow users to add...
Setting a Local Coordinates System
1) Introduction 2) Setting a local coordinates system Setting local coordinates in NAVconfig Setting local coordinates in NAVdisplay 3) Use of local coordinates with RT-Range systems Multiple lo...
Level of Resolution of Longitude and Latitude Measurements
Using more decimal places when specifying the values of Latitude and Longitude for a given position measurement provides a finer resolution and allows for a higher level of accuracy. The linear dis...
Advantages of using multiple GNSS constellations in urban environment
Introduction 1 - General context Urban environments pose a challenge for Inertial Navigation Systems as they typically force the INS to operate in challenged-GNSS conditions, summarised in two main...
Using the J2 Serial connector as access point for Differential corrections
The most common way to feed Differential corrections to an RT unit is to use a radio modem connected to the J3 (15 pins) serial port connector of the User cable. Up until the v2 RT models, the J3 s...
Networking Issues
WiFi Configuration – RT-XLAN 1 Introduction 2 Default settings 3 Connecting to the RT-XLAN 4 Uploading a configuration file to the RT-XLAN 5 Changing the SSID of the RT-XLAN 6 Changing the IP add...
Use of trigger-switches in Lane Surveying
1. Summary of the issue The Lane Survey Wizard within the RT-Range software is used to survey lanes on testing tracks for the purpose of producing map files of the tracks to be used with the RT-R...