Thank you to those of you who joined us on Wednesday, 25th March at 16:00 hrs (GMT) / 12:00 (EST) when OxTS Product Engineer, Jacob Amacker shared his thoughts and insights into the world of survey and mapping.
During this short 30-minute webinar we covered…
- Boresight Misalignment: A common problem investigated
- Boresight Calibration Solution
- Demo: Using OxTS Georeferencer with boresight calibration to produce a highly accurate pointcloud
Resources used in this webinar:
- OxTS Georeferencer software
- xNAV550 INS
- Survey+ INS
- Velodyne VLP-16
- Cloud compare pointcloud software
Attached to the bottom of this page are example datafiles that were used during the demonstration as well as the slides from the presentation.